Message Light; Message Waiting - Uniden UCIS 3000 Owner's Manual

Using Your Caller ID Telephone
Caller ID Service and Call Waiting Caller ID
Service
The "caller identification" service (Caller ID) allows the call-
er's phone number and/or name to be shown on the display
as the call comes in before you pick up the phone. In order
to use this feature, YOU MUST FIRST SUBSCRIBE TO THE
CALLER ID SERVICE provided by your local telephone com-
pany. The name of this service may vary depending on your
telephone company. Before using this feature, please make
sure you have properly entered your area code as explained
in the "Programming Your Area Code" section of this manual.
When a new call comes in, you must let your phone
ring at least 2 full times in order for the Caller ID
information to be displayed.

Message Light

An indicator marked NEW CALL will light up to let you know
when there are new calls received.
If you have a voice mailbox service with your telephone com-
pany, another indicator marked MESSAGE will flash to alert
you to dial your telephone company to check your new mes-
sages.
The MESSAGE indicator also monitors the unit's situation.
When the phone is in use, the MESSAGE indicator will be on
continuously. If the indicator is flashing quickly, it means the
phone is ringing. If it is not ringing and the light is flashing,
the unit has experienced a power outage.

Message Waiting

This unit's MESSAGE WAITING DETECTION is for both FSK
and Stutter Tone Systems.
IF YOUR SERVICE IS FSK:
1. If you have a voice mailbox service from the phone com-
pany, the MESSAGE indicator will flash and "MESSAGE
WAITING" will appear on the display for 20 seconds when
a message waiting signal (on) from the Central Office is
received.
2. The MESSAGE indicator will go off and "MSG WAITING
OFF" will appear for 20 seconds if the message waiting
off signal is sent from the Central office.
14