InstAllIng yoUR pHone
set Up the Base
Attach the stand
For Desktop Use
1. Turn the stand so the
word DESK is right-side up
(it will be on the left).
2. Insert the tabs into the
notches marked DESK at
the top of the base.
3. Slide the stand up until it
snaps into place.
For Wall Mount Use
1. Turn the stand so the
word WALL is right-side up
(it will be on the left).
2. Insert the tabs into the
notches marked WALL at
the bottom of the base.
3. Slide the stand down until
it snaps into place.
Remove the stand
Pull the locking tabs up and back. Then, slide the stand straight off the opposite
direction you put it on.
Connect the Corded Handset
Use the coiled cord to connect the
corded handset to the connector on the
left side of the base.
6
DESK
DESK
WALL
DESK
WALL
WALL