GETTING STARTED
Set Up the Base
Attach the Stand
For desktop use
DESK
WALL
1. Turn the stand so the word Desk is
right-side up (it will be on the left).
2. Insert the tabs into the notches at
the top of the base.
3. Press in on the latches and slip
them into the notches marked Desk.
Remove the Stand
Press in on the latches and slide them out of the notches.
Connect the Corded Handset
Use the coiled cord to connect the corded handset to the connector on the left
side of the base.
For wall mount use only
1. On the front of the base, slide the clip
out of its slot.
2. Rotate the clip 180 degrees.
3. Flip it from front to back and slide it
back into the slot.
For wall mount use
DESK
WALL
1. Turn the stand so the word Wall is
right-side up (it will be on the left).
2. Insert the tabs into the notches at
the bottom of the base.
3. Press in on the latches and slip
them into the notches marked Wall.
1
2
3
3 - English