UPS5000-S-(40 kVA-200 kVA)
User Manual (IP42, 40 kVA Power Modules)
Issue 03 (2020-01-10)
a.
Remove all small covers from the bottom of the cabinet.
b.
Remove the two large covers from the rear bottom of the cabinet, drill holes into
them, and install them to the positions where the small covers were placed.
Figure 3-17 Hole positions
The quantity of holes in the above figure is for reference only.
If holes are drilled for routing cables, attach grommet strips to the hole edges to protect cables.
c.
Reinstall the removed two small covers on the holes at the rear bottom of the
cabinet.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
63