Using The Remote Control With An Integrated Treadmill - Bioness Vector Elite Clinicians Manual

A Fall Prevention window will be displayed indicating that Auto Recovery is in progress. See Figure 9-12.
1. Allow the patient to self-correct and stand up without assistance.
2. When the patient reaches the original standing position, Trolley Tracking and DBWS will resume their
normal operation automatically.
3. The clinician can cancel the Auto Recovery feature at any time by pressing the manual winch up or
down button on the Fall Prevention window. See Figure 9-12.

Using the Remote Control with an Integrated Treadmill

A compatible treadmill can be controlled from the Remote Control after it is connected to the Vector
software.
1. Ensure that the treadmill is powered on and plugged into the PC using the cables provided. For
more information on cable connection, see Page 31.
2. In the Vector PC software, add or select a patient and start a training session. For more
information on starting a Training Session, see Pages 13-14.
Note: The treadmill cannot be connected until a Training Session is initiated through the Vector PC
software.
3. In the Vector Remote Control application, navigate to the Take Control screen and press the
Connect Treadmill button. See Figure 9-13.
Note: Connecting the treadmill using the Remote Control does not give control of the Vector System to
the Remote Control. The Take Control button must also be selected in order to control Vector from the
Remote Control.
68
Clinician's Guide
Figure 9-12: Auto Recovery Dialog Box