Bioness Vector Elite Clinicians Manual page 47

2. When the treadmill is active, the Start button will be replaced by the Pause button which can be
used to pause the treadmill session as needed. See Figure 6-16.
3. The (+) and (-) buttons can be used to adjust speed and incline. See Figure 6-16.
4. The treadmill belt direction can be reversed by pausing the treadmill session, then selecting the
Reverse check box. See Figure 6-16.
Note: The belt direction cannot be changed while the treadmill belt is in operation, and the Reverse
checkbox will not be enabled for selection until the treadmill session is paused.
Increase/Decrease Speed
Reverse Belt Direction
5. When a fall is detected, the treadmill will stop automatically, and the treadmill controls will be
disabled until the Fall Prevented dialog box is closed. See Figure 6-17.
38
Clinician's Guide
Figure 6-15: Minimum Unloading Error
Pause
Figure 6-16: Treadmill Controls Tab with Treadmill On
Increase/Decrease Incline
Stop