Chapter 4
Plug the VALVE connector into the open PVE port on the SmarTrax valve.
4.
Plug the PSI connector into the pressure transducer (P/N 422-0000-086) installed in Port PS of the
5.
SmarTrax valve.
Use plastic cable ties to secure the valve harness to the machine's frame, hoses, and/or cables, ensuring
6.
the cable does not come into contact with moving parts or heat sources.
Valve Harness Wiring Diagram
FIGURE 5.
24
Case IH STX 275-500 and New Holland TJ 275-500 - Model Year 2001-2005 SmarTrax™ Installation Manual