Raven SmarTrax Installation Manual page 21

Install an ORFS M/M/F swivel run tee fitting in the open port of the steering orbital.
9.
•
Models 275/325 - Install a -10 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-031).
•
Larger models - Install a -12 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-029).
Note:
Do not tighten the tee fitting. It may be necessary to adjust it when the SmarTrax hose is installed.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
10.
Install and tighten an ORFS reducer fitting on the 90° end of the installed tee fitting.
11.
•
Models 275/325 - Install a -10 ORFS (F) to -8 ORFS (M) reducer fitting (P/N 333-0012-032).
•
Larger models - Install a -12 ORFS (F) to -8 ORFS (M) reducer fitting (P/N 333-0012-030).
Note:
It may be necessary to install a -8 ORFS M/F 45° swivel elbow fitting (P/N 333-0012-102) or -8
ORFS M/F 90° swivel elbow fitting (P/N 333-0012-067) on one end of the hydraulic hose to
achieve the following SmarTrax hose connections.
Install one end of the supplied hydraulic hose (P/N 214-1000-909) on the 90° end of the installed tee fitting.
12.
Tank Hose Installed on the SmarTrax Valve
FIGURE 15.
Connect the other end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve.
13.
Tighten all hose ends and the installed tee adapter fitting connection to the steering orbital.
14.
Manual No. 016-5032-020 Rev. A
Hydraulic System Installation
17