SmarTrax Load Sense Hose Installed
FIGURE 18.
Note:
It may be necessary to install a -6 ORFS M/F 45° swivel elbow fitting (P/N 333-0012-090) or -6
ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on one end of the hydraulic hose to
achieve the following SmarTrax hose connections.
Install one end of the supplied hydraulic hose (P/N 214-1000-910) on the open port on the steering orbital.
3.
Connect the other end of the installed hydraulic hose to the fitting installed in Port LS STEER of the
4.
SmarTrax valve.
Manual No. 016-5032-020 Rev. A
Hydraulic System Installation
19