Raven SmarTrax Installation Manual page 38

C 3
HAPTER
8. Install a 15L M/M/F swivel run tee adapter fitting (P/N 333-0012-361) on the steel tank line.
9. Connect the tank hose to the opposite end of the installed tee fitting.
10. Install the 90° end of the supplied hydraulic hose (P/N 214-1001-202) on the 90° end of the installed tee fitting.
FIGURE 32. Tank Hose Installed on SmarTrax Valve
11. Connect the straight end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve
(P/N 334-0003-088).
12. Route the installed tank hoses away from sharp edges, pinch points, moving parts, and heat sources.
34 SmarTrax™ Installation Manual for Kubota M7 Series
Installed Hydraulic Hose
(P/N 214-1001-202)