Raven SmarTrax Installation Manual page 35

FIGURE 25. Hydraulic Hose Installed on Steel Load Sense Line
7. Install a 8L M/F 90° elbow fitting (P/N 333-0012-367) on the steel load sense line.
8. Install the male end of the supplied hydraulic hose (P/N 214-1001-201) on the installed elbow fitting.
NOTE: It may be necessary to install additional 8L M/F 90° elbow fittings to achieve the connection.
FIGURE 26. LSPV Hose Installed on SmarTrax Valve
9. Connect the other end of the installed hydraulic hose to the fitting installed in Port LSPV of the SmarTrax valve.
10. Secure the load sense hoses away from sharp edges, pinch points, and heat sources.
016-4001-150 Rev. B
HYDRAULIC SYSTEM INSTALLATION
31