Raven SmarTrax Installation Manual page 26

C 4
HAPTER
6. Connect the round 3-pin power connector of the node cable into the convenience power port on the right-
hand instrument panel.
7. Connect the DGPS connector to the GPS receiver.
FIGURE 7. DGPS OUT Connector Routed Under Operator's Seat
8. Route the DGPS OUT connector out the right corner of the operator's seat base and under the right arm rest.
FIGURE 8. Console Cable DGPS Connector
Console
Cable
DGPS
Connector
9. Connect the DGPS OUT connector to the Field computer cable's DGPS connection.
22 SmarTrax, Case Trident 5550, Non-Steer Ready Installation Manual