Raven SmarTrax Installation Manual page 7

Safety
Warning
Labels
Steering Position Sensor Warning label
Hydraulic Warning label
Safety Warning Labels have been provided to highlight to users the importance of:
•
Avoiding damage to Steering Position Sensor
•
Not tampering with SmarTrax hydraulic valves
These warning labels are to be placed in the specified locations as indicated
below.
Steering Position Sensor Warning Label
It is essential to avoid damage to Steering Position Sensor (SPS). Raven
Industries has provided a 'Do Not Step' warning label. Place label on top
surface of Steering Position Sensor (as shown below) facing up and visible
to operator.
Hydraulic Warning Label
This label should be placed on the steering assist manifold or on the Hydraulic
Valve Mounting Bracket as shown below. 'Tampering with hydraulic valves
may cause serious injuries or death & will void warranty'.
NOTE: The picture below is only an example of where to place the hydraulic
warning label on the steering assist manifold. Placement will vary depending on
the valve used.
Manual # 016-9001-008
5