Raven SmarTrax Installation Manual page 12

Univ. Hyd. Steering Kit Install Guid for Open Center Hydraulic Systems
10
5. If both brackets are used in the installation, first attach the bracket
mounting plate to the vehicle. Once the place is installed, attach the
valve mounting plate using the supplied bolts and washers.
6. The bracket mounting plate is designed to provide valve height adjust-
ment for easier hose routing by using five pairs of mounting holes. To
adjust bracket up or down, unbolt valve mounting bracket and move to
the desired height and reattach using the supplied bolts.
7. In some installations, it may be more appropriate to use only the valve
mounting bracket. If so, mount the bracket using the existing holes in
the frame to securely fasten the bracket to the frame.