Raven SmarTrax Installation Manual page 11

Installing
Hydraulic
Bracket
I
NSTALLING
1. The bracket is intended to be universal to accomodate valve mounting
on multiple machines. However, some modification may be necessary
to fit the desired application.
2. The valve mounting bracket is made of two parts. The bracket with the
valve mounting holes may be used independently and the secondary
mounting plate may be discarded if not needed.
3. Mount the bracket as close as possible to the steering orbital, in order to
keep hydraulic hoses as short as possible. Also, mount the bracket in a
position that will protect the valve from getting damaged from mud, crops,
etc.
4. Mount the bracket mounting plate by using the existing holes in the
vehicle frame. The bracket mounting plate may need to have additional
holes drilled in order to accomodate various hole patterns.
H C
YDRAULIC
Manual # 016-9001-008
C
H A P T E R
3
OMPONENTS
9