Wiring the
Solenoid and
Override
Switch
C
ABLE
1.
In this portion, the hydraulic valve and the flow monitor will be wired
using the cable labeled Solenoid, Override, Float Valve, and S.P.S.
2.
The following schematic will show the wiring of the hydraulic system.
3.
Once the wiring is connected, ensure the Solenoid cable is cable-tied
neatly and securely away from moving parts.
C
ONNECTION AND
Manual # 016-9001-008
C
H A P T E R
5
R
OUTING
19