Raven SmarTrax Installation Manual page 13

Safety
Precautions
for
Connecting
Hydraulic
Hoses
H
WARNINGS:
WARNING
•
The machine must remain switched off, isolated, and stationary,
while installation and maintenance is being done.
•
When disconnecting hydraulic hoses, or when purging is required,
be aware that hydraulic oil may be under pressure and hot.
Caution must be exercised.
•
The risk of contamination of the hydraulic system is at its
greatest when any fitting is removed. It is essential that, prior to
the loosening of any fitting, the fitting is cleaned thoroughly with a
spray cleaner such as Brake Clean
•
Note: Brake Clean
such as those used in ORFS fittings. If a fitting is to be cleaned
internally, the o-ring should be removed first and cleaned with
fiberless cloth.
•
Lines should be capped immediately on removal, to minimize
contamination.
S
YDRAULIC YSTEM
TM
can cause premature failure to o-rings
Manual # 016-9001-008
C
H A P T E R
4
I
NSTALLATION
TM
.
11