Setting Traffic Shaping; Deleting Traffic Shaping - Tut Systems SMS2000 User Manual

Using SMS with RADIUS Server

Setting Traffic Shaping

The SMS2000 provides traffic shaping to limit the maximum bandwidth for a group of
subscribers or a static port. The configuration parameters for traffic shaping that you set
with the shape command apply to the active group. xbs is the maximum transmit rate
(bits per second) from the SMS2000 to the subscriber. rbs is the maximum receive rate
(bits per second) allowed for the subscriber.
To set traffic shaping for a group/port, use this command:
shape {xbps[/rbps]
For example, port 801 has previously been set to static. This example limits devices on
port 801 to 300Kb/s downstream and 200Kb/s upstream.
sms2000% shape 300000/200000 port 801
Unless otherwise specified, all subscribers are limited to 400Kb/s both upstream and
downstream.
sms2000% shape 400000

Deleting Traffic Shaping

To delete traffic shaping, use this command:
shape {xbps[/rbps]} delete
TUT Systems, Inc
For more information on the shape command, including descriptions of
Note:
the advanced shaping options, see the SMS2000 Command Reference.
Page 82 of 104 P/N 220-06288-20