Rebooting The System; Verifying The Configuration - Tut Systems SMS2000 User Manual

Initial Configuration
for example, to save the current configuration, type:

Rebooting the System

In order for saved configuration changes to take effect, you must reboot the system.
To force the system to shut down completely and then restart, use this command:
For example, to reboot the system, type:

Verifying the Configuration

1. Login to the system.
2. Ping a known site.
sms2000% ping www.yahoo.com
3. Press CTRL-C to stop the pinging.
4. Ping another known site.
sms2000% ping www.apple.com
5. Press CTRL-C to stop the pinging.
If the SMS2000 cannot ping these sites, try to ping a known external IP Address, check
your configuration and the local network to verify that you have connectivity to the
Internet.
TUT Systems, Inc
sms2000% save
reboot
sms2000% reboot
Page 24 of 104 P/N 220-06288-20