Changing A Password; Displaying Control Keys - Tut Systems SMS2000 User Manual

System Administration
For example, to reboot the system, type:

Changing a Password

Use the password command to prevent unauthorized users from accessing the SMS2000.
The default password is "manager". You should change the default as soon as possible in
order to secure the SMS2000.
To change the SMS2000 password, use this command:
For example, to set a new password, type:

Displaying Control Keys

To display a summary of the valid control keys for the system, use this command:
For example, to display the on-line key mapping, type:
SMS2000% keys
TUT Systems, Inc
sms2000% reboot
A bad password can dramatically reduce the system security of the
Note:
SMS2000. Please follow general password guidelines by including alpha,
numeric, and other printable characters in a password that is at least seven
characters long.
passwd
sms2000% passwd
No characters are displayed when entering the new password.
Note:
keys
For a complete list of all available control keys see Chapter 2, "Getting
Note:
Started".
Page 37 of 104 P/N 220-06288-20