System Administration
SNMP Management
Beginning with SMS2.3.6, the SMS supports remote SNMP management. SNMP
System Contact and System Location will be reported in the SNMP system OID. All
SMS OIDs are read-only. An SNMP trap is sent to the trap-recipient when the SMS
boots or reboots. By default, the SNMP agent is disabled.
SNMP Agent
To enable the SNMP agent, type:
snmp enable
To disable the SNMP agent, type:
snmp disable
To view the SNMP agent status, type:
show snmp status
SNMP System Contact
To specify the SNMP System Contact, type:
snmp system-contact system-contact-string
To view SNMP System Contact information, type:
SMS000$ show snmp system-contact
SNMP System Location
To specify the SNMP System Location, type:
snmp system-location system-location-string
TUT Systems, Inc
For example,
SMS2000% snmp system-contact "Some Person"
Note: Place the system contact in quotes if it includes spaces
For example,
SMS2000% snmp system-location "Basement 123 Any St, New York, NY
10001 USA"
Note: Place the system location in quotes if it includes spaces
Page 38 of 104
P/N 220-06288-20