Sms2000 Rules; Adding A Rule; Deleting A Rule - Tut Systems SMS2000 User Manual

Service Creation Using Groups and Rules

SMS2000 Rules

The SMS2000 includes a mechanism called rules. Managers can use the rules directly to
create configurations which are specific to their environment.
Most configuration attributes for the SMS2000, including traffic shaping and subscriber
ID information, are applied to groups. Subscribers are assigned to these groups through
rules.

Adding a Rule

Rules assign a subscriber to a given group.
To add a rule, use this command:
set rule rule_name [groupname] priority rule_string
For example, to provide a user called "mary" with an address from a DHCP pool, type:
sms2000% group add custdhcp
Active group is "custdhcp"
sms2000% auth off
sms2000% dhcp-pool custnatdhcp 123.123.123.10 123.123.123.20
255.255.255.0
sms2000% iptype DHCP
sms2000% set rule mary 1 mac=00:11:22:33:44:55
When "mary" connects, she is automatically placed in the "custdhcp" group based on her
source MAC address and assigned a DHCP address from the specified group pool.

Deleting a Rule

To delete a configured rule, use this command:
delete rule
For example, to delete the rule named test, type:
sms2000% delete rule test
TUT Systems, Inc
The OCS sends dynamically created rules to the SMS2000 in order to
Note:
implement configurations specified using services at a given property. The OCS
in general provides the simplest mechanism to make and manage rules on the
SMS2000.
he OCS also uses these rules to download service offering configurations
Note:
to the MS2000.
his command does not delete OCS created rules.
Note:
Page 64 of 104 P/N 220-06288-20