Disabling Authentication; Saving The Configuration - Tut Systems SMS2000 User Manual

Initial Configuration
This example resets the system configuration, setting the local IP address to
192.168.1.244 with a 24-bit subnet mask (255.255.255.0) and the default gateway is
192.168.1.1.
There are two DNS servers; the first is 192.168.1.42, and the second is 192.168.1.1.
Setting the Hostname
Use the set hostname command to immediately change the host name at the command
prompt. SMS2000 uses the specified host name when communicating with the OCS and
as the SMS2000 command prompt. Each SMS2000 in a network should have a unique
host name.
To set the system hostname, use this command:
For example, to set the host name of the local system to ParkPlace,type:

Disabling Authentication

The command auth off disables authentication.
To disable authentication for the current group and remove the server IP, use this
command:
For example, to disable authentication for the current group, type:

Saving the Configuration

To save the configuration, use this command.
TUT Systems, Inc
sms2000% set quick-config 192.168.1.244/24 192.168.1.1
192.168.1.42 192.168.1.1
Host names cannot contain spaces, unprintable characters, quotation
Note:
marks (" "), or apostrophes (').
set hostname hostname
set hostname ParkPlace
sms2000%
Additional options for forced web pages are available in the SMS2000
Note:
Command Reference.
auth off
sms2000% auth off
Save
Page 23 of 104 P/N 220-06288-20