Table of Contents
Advertisement
System Administration
Upgrading from Tut Systems' Website
1. Go to the Tut Systems website at http://www.tutsystems.com.
2. On the Support pull-down menu, click "SMS/OCS".
3. Click Downloads.
4. Enter your Company's name and product serial number (as printed on your invoice)
where required. If you purchased the product before 1-September-2000, or have
purchased the product through a third party, please contact Customer Support.
5. Click Login.
6. Obtain the URL required for the SMS2000 load sys command, which is located at
the bottom of the Latest SMS/OCS Software and Documentation section of the
website. The load sys command will be in this format:
Where the url is listed on the Tut Systems Web site.
7. Log in to the SMS2000 and type in the load sys command that you obtained from
the Tut Systems website.
Downloading the SMS2000 Firmware from
the Tut Systems' Website
1. Go to the Tut Systems website at http://www.tutsys.com.
2. On the Support pull-down menu, click "SMS/OCS".
3. Click Downloads.
4. Enter your Company's name and product serial number (as printed on your invoice)
where required. If you purchased the product before 1-September-2000, or if you
purchased the product through a third party, please contact Customer Support.
5. Click Login.
6. Click SMS2000 Version 2.3.2 Firmware.
Archiving SMS2000 Firmware and
distributing it from a Server
1. Download the firmware using a browser utility from the source server at Tut
Systems.
2. Place the firmware on the local ftp or http server.
3. To load the firmware, use this command, where your url is the URL to the file:
sms2000% load sys your url
TUT Systems, Inc
The complete URL for the latest build is on the Tut Systems web site.
Note:
The OCS server is an http server and can be used to archive SMS2000
Note:
firmware builds.
Page 42 of 104
sms2000% load sys url
P/N 220-06288-20
Advertisement
Table of Contents
Troubleshooting
