System Administration
For example, to enable the display of log messages in current telnet session window,
type:
For example, to disable the display of log messages in current telnet session window,
type:
System Administration Tools
Displaying Version Information
To display the release number, reboot count, system images, active system images, and
port information, use the following command:
For example, to see version information, type:
Exiting the Management Session
Use the exit command to exit a management session. If you are using telnet, SMS2000
terminates the connection. If you have made configuration changes during the session,
SMS2000 prompts you to save the unsaved changes, if you do not save them, the changes
are lost. To exit the management session, use this command
For example, to exit the management session, type:
Rebooting the System
In order for saved configuration changes to take effect, you must use the reboot
command to restart the system.
To force the system to shut down completely and then restart, use this command:
TUT Systems, Inc
displog {on | off}
sms2000% displog on
sms2000% displog off
version
sms2000% version
exit
sms2000% exit
reboot
Page 36 of 104
P/N 220-06288-20