Safety; Proper Use; Staff Selection And Qualification; Organisational Safety Measures - Kessel Aqualift F XL Mono Installation And Operating Manual

3.1

Proper use

The Station is to be used only for the extraction of wastewater, including that which contains sewage.
Any use of the Station in an environment at risk from explosions is not permissible.
Any of the following actions that are not approved explicitly and in writing by the manufacturer
- Conversions or attachments
- Use of non-original spare parts
- Performance of repair work by companies
or persons not authorised by the manufacturer
- Use under conditions other that those required in the current guidelines and standards
may render the warranty invalid.
3.2

Staff selection and qualification

Persons who operate and/or assemble the Station must:
- be at least 18 years old,
- be trained adequately for the respective tasks,
- be familiar with and follow the relevant technical rules and safety regulations.
The operator decides about the necessary qualifications for the
- operating staff
- maintenance staff
- service staff
The operator must ensure that only qualified staff work on the Station.
"Qualified staff" refers to persons who are able to perform the relevant tasks thanks to their training and
experience and their knowledge of the relevant provisions, applicable standards and accident prevention
regulations and who are able in the process to detect and avoid any possible risks.
Any work on electrical components may be carried out only by trained technical staff and in compliance with all
applicable provisions of the accident prevention regulations.
3.3

Organisational safety measures

The operating and maintenance manual must always be kept available at the Station.
3.4

Risks arising from the product

3.4.1

Risk due to electrical current and cables

All live components are protected against unintentional contact. Housing covers, plugs and cables must be de-
energised before being opened. Any work on electrical components may be carried out only by technical staff
(see 2.2).
3.4.2

Danger through hot surfaces

The drive motors of the pumps become hot during operation. Contact with the hot surfaces may lead to severe
burns and damage to objects. Wear suitable personal protective equipment and ensure sufficient cooling
before contact.
V 1.0

Safety

39 / 60
3 Safety