Configuring A Vlan Group - H3C S7500X Series Configuration Manual

The voice VLAN in automatic mode processes only tagged voice traffic. Do not configure a VLAN as
both a protocol-based VLAN and a voice VLAN.
To configure a protocol-based VLAN:
Step
1. Enter system view.
2. Enter VLAN view.
3. Associate the VLAN
with a protocol
template.
4. Exit VLAN view.
5. Enter interface view.
6. Set the port link type to
hybrid.
7. Assign the hybrid port
to the specified
protocol-based VLANs.
8. Associate the hybrid
port with the specified
protocol-based VLAN.

Configuring a VLAN group

A VLAN group includes a set of VLANs.
On an authentication server, a VLAN group name represents a group of authorization VLANs. When
an 802.1X user passes authentication, the authentication server assigns a VLAN group name to the
device. The device then uses the received VLAN group name to match the locally configured VLAN
group names. If a match is found, the device selects a VLAN from the group and assigns the VLAN to
the user. For more information about 802.1X authentication, see Security Configuration Guide.
To configure a VLAN group:
Step
1. Enter system view.
2. Create a VLAN group and
enter its view.
3. Add VLANs to the VLAN
group.
Command
system-view
vlan vlan-id
protocol-vlan [ protocol-index ] { at | ipv4
| ipv6 | ipx { ethernetii | llc | raw | snap } |
mode { ethernetii etype etype-id | llc
{ dsap dsap-id [ ssap ssap-id ] | ssap
ssap-id } | snap etype etype-id } }
quit
•
Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
port link-type hybrid
port hybrid vlan vlan-id-list { tagged |
untagged }
port hybrid protocol-vlan vlan vlan-id
{ protocol-index [ to protocol-end ] | all }
Command
system-view
vlan-group group-name
vlan-list vlan-id-list
14
Remarks
N/A
N/A
By default, a VLAN is not
associated with a protocol
template.
N/A
N/A
By default, all ports are access
ports.
By default, a hybrid port is an
untagged member of the VLAN
to which the port belongs when
its link type is access.
By default, a hybrid port is not
associated with a
protocol-based VLAN.
Remarks
N/A
By default, no VLAN groups exist.
By default, no VLANs exist in a
VLAN group.
You can add multiple VLAN lists to
a VLAN group.