Configuration Restrictions And Guidelines; Ethernet Link Aggregation Configuration Task List - H3C S7500X Series Configuration Manual

Figure 5 S-MLAG application scenario

Configuration restrictions and guidelines

The device supports a maximum of 1000 aggregation groups and 32 member ports per group.

Ethernet link aggregation configuration task list

Tasks at a glance
(Required.) Configuring link aggregations:
•
Configuring a manual link aggregation
•
Configuring automatic link aggregation
•
Configuring S-MLAG
(Optional.) Configuring an aggregate interface:
•
Configuring the description of an aggregate interface
•
Configuring a dynamic aggregation group to use port speed as the prioritized criterion for reference port
selection
•
Setting the MTU for a Layer 3 aggregate interface
•
Setting the minimum and maximum numbers of Selected ports for an aggregation group
•
Setting the expected bandwidth for an aggregate interface
•
Configuring an edge aggregate interface
•
Shutting down an aggregate interface
•
Restoring the default settings for an aggregate interface
(Optional.)
not received LACPDUs
(Optional.) Configuring load sharing for link aggregation groups:
•
Setting load sharing modes for link aggregation groups
•
Enabling local-first load sharing for link aggregation
(Optional.)
Disabling the default action of selecting a Selected port for dynamic aggregation groups that have
Enabling BFD for an aggregation group
11