[DeviceB-GigabitEthernet1/0/3] mvrp registration fixed
[DeviceB-GigabitEthernet1/0/3] quit
# Display local MVRP VLAN information on GigabitEthernet 1/0/3.
[DeviceB] display mvrp running-status interface gigabitethernet 1/0/3
-------[MVRP Global Info]-------
Global Status
Compliance-GVRP
----[GigabitEthernet1/0/3]----
Config
Status
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Registered VLANs :
1(default), 10
Declared VLANs :
20
Propagated VLANs :
10
The output shows that VLAN information on GigabitEthernet 1/0/3 is not changed after you set its
MVRP registration mode to fixed.
# Delete VLAN 10 on Device A.
[DeviceA] undo vlan 10
# Display local MVRP VLAN information on GigabitEthernet 1/0/3 of Device B.
[DeviceB] display mvrp running-status interface gigabitethernet 1/0/3
-------[MVRP Global Info]-------
Global Status
Compliance-GVRP
----[GigabitEthernet1/0/3]----
Config
Status
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Registered VLANs :
1(default), 10
Declared VLANs :
20
Propagated VLANs :
10
The output shows that dynamic VLAN information on GigabitEthernet 1/0/3 is not changed after you
set its MVRP registration mode to fixed.
: Enabled
: False
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Fixed
: Enabled
: False
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Fixed
16