Step
Ethernet interface view,
management Ethernet
interface view, or Layer
2/Layer 3 aggregate
interface view.
4.
Enable advertisement of the
management address TLV
on the interface and set the
management address to be
advertised.
5.
Set the encoding format of
the management address to
string.
Setting other LLDP parameters
The Time to Live TLV carried in an LLDPDU determines how long the device information carried in
the LLDPDU can be saved on a recipient device.
By setting the TTL multiplier, you can configure the TTL of locally sent LLDPDUs. The TTL is
expressed by using the following formula:
TTL = Min (65535, (TTL multiplier × LLDP frame transmission interval + 1))
Command
interface-number
•
In Layer 2 Ethernet interface
view or management Ethernet
interface view:
lldp tlv-enable basic-tlv
management-address-tlv
[ ipv6 ] [ ip-address |
interface loopback
interface-number ]
lldp agent
{ nearest-customer |
nearest-nontpmr }
tlv-enable basic-tlv
management-address-tlv
[ ipv6 ] [ ip-address ]
•
In Layer 3 Ethernet interface
view:
lldp [ agent
{ nearest-customer |
nearest-nontpmr } ] tlv-enable
basic-tlv
management-address-tlv
[ ipv6 ] [ ip-address ] | interface
loopback interface-number ]
•
In Layer 2/Layer 3 aggregate
interface view:
lldp agent { nearest-customer
| nearest-nontpmr } tlv-enable
basic-tlv
management-address-tlv
[ ipv6 ] [ ip-address ]
•
In Layer 2/Layer 3 Ethernet
interface view or management
Ethernet interface view:
lldp [ agent
{ nearest-customer |
nearest-nontpmr } ]
management-address-format
string
•
In Layer 2/Layer 3 aggregate
interface view:
lldp agent { nearest-customer
| nearest-nontpmr }
management-address-format
string
14
Remarks
By default:
•
The nearest bridge agent
and nearest customer
bridge agent advertise the
management address
TLV.
•
The nearest non-TPMR
bridge agent does not
advertise the
management address
TLV.
By default, the encoding
format of the management
address is numeric.
The device supports only the
numeric encoding format for
IPv6 management addresses.