H3C S7500X Series Configuration Manual
Hide thumbs
Also See for S7500X Series:
- Configuration manual (321 pages) ,
- Installation manual (124 pages) ,
- Interface configuration manual (34 pages)
Subscribe to Our Youtube Channel
Related Manuals for H3C S7500X Series
Summary of Contents for H3C S7500X Series
- Page 1 H3C S7500X Switch Series OAA Configuration Guide New H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 7585P05 and later versions Document version: 6W100-20200529...
- Page 2 The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
- Page 3 Preface This configuration guide describes OAA fundamentals and configuration. It describes how to configure the H3C open application platform (OAP) module connected to your device to exchange information between your device and the OAP module. This preface includes the following topics about the documentation: •...
- Page 4 Convention Description Folder. Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software.
- Page 5 It is normal that the port numbers, sample output, screenshots, and other information in the examples differ from what you have on your device. Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
- Page 6 Contents Configuring OAP ···························································································· 1 Overview ···························································································································································· 1 OAP functions ············································································································································ 1 OAP manager timers ·································································································································· 2 Configuring OAP ················································································································································ 2 Enabling OAP ············································································································································· 2 Setting the clock synchronization timer ······································································································ 2 Setting the client monitoring timer ·············································································································· 2 Managing OAP clients········································································································································ 3 Restarting an OAP client ····························································································································...
- Page 7 Configuring OAP Overview The Open Application Platform (OAP) is an open application protocol that is based on the Open Application Architecture (OAA). OAA allows products from different vendors to operate together to meet service requirements. Figure 1 OAA diagram Interfacing component Standalone service Routing/switching...
- Page 8 OAP manager timers The OAP manager uses the following timers: • Clock synchronization timer—Regularly triggers the OAP manager to send clock and time zone synchronization notifications to OAP clients. This mechanism keeps the clients' clocks synchronized with the manager's clock. •...
- Page 9 Managing OAP clients IMPORTANT: This feature is available on the following modules: • LSU1FWCEA0 • LSQM1WCMX20 • LSQM1WCMX40 You can restart or shut down an OAP client. Restarting an OAP client Step Command Enter system view. system-view Restart an OAP client. oap client reboot client-id Shutting down an OAP client This feature applies only to OAP clients on Linux.
-
Page 10: Table Of Contents
Contents Configuring the OAP module ········································································· 1 Internal interfaces for OAP modules ·················································································································· 1 Logging in to an OAP module ···························································································································· 2 Logging in through the console port on the OAP module ·········································································· 2 Logging in through the management Ethernet port on the OAP module by using SSH ···························· 2 Logging in through the internal Ethernet interface on the OAP module by using SSH ······························... -
Page 11: Configuring The Oap Module
The Open Application Architecture provides an open interface for third-party vendors to develop and integrate value-added applications into H3C products. The hardware platforms for these applications can be devices or modules. H3C has developed series of application-specific modules called Open Application Platform (OAP) modules. -
Page 12: Logging In To An Oap Module
Assign an IP address to the management Ethernet port of the OAP module. ake sure the management Ethernet port and the SSH client (an H3C device or a PC with SSH client software) can reach each other. From the SSH client, establish an SSH connection to the IP address of the management Ethernet port on the OAP module. -
Page 13: Logging In Through The Internal Ethernet Interface On The Oap Module By Using Ssh
Logging in through the internal Ethernet interface on the OAP module by using SSH When installed in the expansion slot of a device, an OAP module exchanges information with the device through two internal interfaces: one serial port and one fast Ethernet interface. The fast Ethernet interface is used for this login method. - Page 14 IMPORTANT: To avoid service data loss, close the operating system of an OAP module before resetting the module. The following modules do not support this operation: • LSUM1WCMX20RT. • LSUM1WCMX40RT. • LSU1IPSBEA0. • LSU1WCME0. You can reset an OAP module to restore it to normal operation in the following situations: •...
Need help?
Do you have a question about the S7500X Series and is the answer not in the manual?
Questions and answers