Technical Data; G/H - ProMinent CHLORINSITU IIa Assembly And Operating Instructions Manual

Technical data

11 Technical data
11.1
Specifications of the Chlorinsitu
Capacity (FAC production)
All technical data applies to an
ambient temperature of 20 °C and a
water temperature of 15 °C
System availability
Salt turnover
Energy consumption DC
FAC concentration*, based on NaCl
as the starting substance
pH value of product (approx.)
Number of electrolysis cells
Product volume (NaOCI)
Chlorate
Power supply
Nominal energy consumption
External installation fuse
Salt consumption
Salt quality requirements
Max. relative humidity
Ambient temperature
Inlet water temperature
Inlet water specification
Ambient conditions
External salt dissolving tank
Disinfection applications
All specifications are stated at an ambient temperature of 20 °C and a water temperature of 15 °C.
* The output of the system is affected by the temperature and the quality of the water and salt.
40
® IIa 625 ... 2500 g/h

625 g/h

1250 g/h
15 kg/day 30 kg/day
9 g/l ± 10 % (0.9 % ± 10 %)
1 2
75 l/h 150 l/h
1800 l/day 3600 l/day
< 4 % based on freely available chlorine
3 x 400/230 VAC ± 10 %, neutral, 50 Hz
3.8 kW 6.8 kW
3x25 male
1.8 kg/h 3.75 kg/h
45 kg/day 90 kg/day
CHLORINSITU salt or salt tablets that meet the following specifica‐
®
max. 0.05 % insoluble substances,
max. 10 mg/kg iron,
max. 10 mg/kg manganese,
max. 100 mg/kg calcium + magnesium
15 ... 25 °C, higher/lower temperatures require a chiller/heater.
Potable water quality / > 2 ... < 5 bar / > 32 l/min / Water feed max.
The air in the installation room must be non-condensing, non-corro‐
sive and free of dust.
200 l 380 l
Swimming pools cooling towers, potable water, process water etc.
2500 g/h
60 kg/day
24 h/day
3.0 kg/kg FAC
4.0 kWh/kg FAC
9.5
1
300 l/h
490 l/day
12.8 kW
7.5 kg/h
180 kg/day
tions:
min. 99.4 % NaCl,
85 %
10 ... 40 °C
(no direct sunlight)
30 °dH
520 l
3x40 male