ProMinent CHLORINSITU IIa Assembly And Operating Instructions Manual page 19

A
B
C
D
Fig. 5: Connectors for the Chlorinsitu
A Connector, inlet for softened water
B Connector, softened water discharge to the
brine storage tank
C Connector, brine to the softener
D Connector, product output from product pump
E Connector, exhaust air line
E
IIa system cabinet
®
F Connector, brine inlet to brine pump
G -
H Connector, waste water outlet
I Sleeve section, electrical power supply line
J, K Sleeve section, electrical control lines
10. Route a Ø 32 mm PVCU line from the Ø 32 mm PVCU con‐
nector (H) on the system cabinet (N) into the sewage system.
11. Route a Ø 125 PVCU exhaust air line (maximum 10 metres)
outside above the system cabinet.
CAUTION!
Do not position the outlet inside the building.
Glue the output of the device (F) to the exhaust air line.
Installation and assembly
G / H / I
M L
A2935
19