Status - ProMinent CHLORINSITU IIa Assembly And Operating Instructions Manual

Operation

6.2 Status

Chlorinsitu
FLOW &
DEGASSER LEVEL
TEMPERATURE
AIRFLOW
PRODUCT STORAGE TANK
POWER UNIT
PRODUCTION
HOURS
Fig. 13: Status
Parameter
Water flow
Air flow
Temperature
Product storage tank
Power supply
Production hours
26
You can read off different parameters in the
-IIa
®
Setpoint flow = 276 l/h
Water flow control valve:
Control 0 %
Water valve
Flow, in 0 l/h
Flow, out 0 l/h
Brine pump
Control 0 %
Max. level of degasser
Booster pump:
Disabled
Control 23 %
Pressure sensor:
Current signal 0.0 mA
Current level -5 cm
Meaning
'Water flow IN' (softened water - sensor no. 4) and 'Product flow OUT'
(sensor no. 3) through the electrolysis cells.
Opening degree of the control valve.
Status of the airflow sensor (sensor no. 10).
'Temperature IN' (sensor no. 16) and 'Temperature OUT' (sensor no.
17) of the electrolysis cells.
Status of the level switches.
Status and parameters of the internal power supply.
Voltage and current of the cells
'Total production hours'
Counter for
'Production hours since the last maintenance'
Counter for
' Days until the next maintenance'
Display of
'STATUS' view.
22.06.2020
22.06.59
A2938