Speco N32NRE User Manual page 19

NVR User Manual
EZ Setup & Main Interface
④ Add Camera. Add cameras via PoE first before adding any cameras from the LAN. Speco cameras added via the PoE ports will automatically be
added to the corresponding channel. To add cameras from the LAN, make sure all cameras are set to DHCP. Click "Refresh" to refresh the list of online
IP cameras which are in the same local network with NVR and then click to add the searched camera. Click "Add All" to add all the cameras in
the list. Click to delete the added camera. Click "Delete All" to delete all the added cameras.
Click to edit the searched IP camera as shown on the below left. Enter the new IP address, subnet mask, gateway, username and the password
of the camera. You can check "Sync to IPC" to modify the IP address of the IPC via different network segments for being in the same network segment
with the NVR. Click "OK" to save the settings.
12