Disk; Disk Management; Storage Mode Configuration - Speco N32NRE User Manual

Record & Disk Management
The camera will start analytics recording once you finish the above settings. This function is only available for some IPCs.

7.5 Disk

7.5.1 Disk Management

Disk Management
Ø
Click StartàSettingsàDiskàDisk Management to go to disk management interface. You can view the NVR's disk number and disk status and so on
in the interface. Click "Formatting" button to format the HDD.
Data Encryption:
① Click "Data Encrypt".
② Enter the username and password used to log in the NVR. This user shall have the permission of disk management.
③ Check the disk you want to encrypt and then enter the password.
After you encrypt the data of a disk, this disk cannot be read by other NVRs unless it is unlocked.
Data Decryption:
① Click "Change Encrypt".
② Enter the username and password used to log in the NVR. This user shall have the permission of disk management.
③ Check the disk you want to decrypt and then empty the password.
④ Click "Close Encrypt".
Unlock the disk: when one encrypted disk is transferred from another NVR to this NVR, it will be in locked status. Then you can select this locked disk
and click "Unlock". After you enter the password of its data encryption, its status will be "Read Only". Now you can read the data of this disk but it
cannot be written anything.

7.5.2 Storage Mode Configuration

Click StartàSettingsàDiskàStorage Mode to go to the interface as shown below.
43
NVR User Manual