Speco N32NRE User Manual page 21

EZ Setup & Main Interface
The buttons in area ① are introduced in the table below.
Introduction of area ②:
Click "Camera" to view all the added cameras in the camera list. Select one camera window on the left side of the interface and then double click
Button Meaning
Start button. Click it to pop up area ③.
Full screen button. Click it to show full screen; click it again to exit the full screen.
Screen mode button.
Dwell button (see 5.2.2 Quick Sequence View and 5.2.4 Scheme View in Sequence for
details).
Click it to enable OSD; click again to disable OSD.
Click to set the default playback time before starting instant playback (8.1 Instant
Playback) or going to the playback interface for playback operations (8.2 Playback
Interface Introduction); click
choose "5 minutes ago" as the default playback time, you can playback the record from
the past five minutes.
Manual record button. Click it to enable/disable record.
Manual alarm button. Click it to trigger or clear the alarm-out manually in the popup
window.
Record status button. Click it to view the record status.
Alarm status button. Click it to view the alarm status.
Disk status button. Click it to view the disk status
Network status button. Click it to view the network status.
Information button. Click it to view system information.
to go to the playback interface. For instance, if you
14
NVR User Manual