View Disk And S.m.a.r.t. Information - Speco N32NRE User Manual

NVR User Manual
Record & Disk Management
There are all four disk groups. By using disk group, you can correspond the camera to disk (the record data of the camera in the group will be stored
into the disks in the same group). The NVR with e-SATA interface supports e-SATA recording.
The added disks and cameras will be added into group one automatically. The disks and cameras in the groups can be deleted except group one
(select a disk group and then click on the top right corner of the added disk or camera to delete it from the group). The deleted disks and
cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only be added into one group. Select a disk group and then
click in the disk or camera row to pop up a window. Check the disks or cameras in the window and then click "Add".

7.5.3 View Disk and S.M.A.R.T. Information

Click StartàSettingsàDiskàView Disk Information to view the HDD information; click "S.M.A.R.T. Information" to view the working status of the
HDD. Refer to the picture below.
44