Backplane Board Installation Procedures; Required Tools; Power Down System And Remove Chassis Cover; Figure 1. Removing Chassis Cover - Intel SSR316MJ2 Installation Manual

Backplane Board Installation Procedures

Required Tools

•
Cross-head (Number 1 size Phillips

Power Down System and Remove Chassis Cover

A. From within the Intel
B. Remove both AC Power cords from the AC Power inputs on your system. See Figure 1.
C. Loosen the two thumb screws from the top of the chassis cover. See Figure 1.
D. Facing the front of the chassis, push the top cover rearward, and then lift it up to remove it.
8
*
) screwdriver, maximum length 4 inches
®
Storage System Console, power down your system.
A

Figure 1. Removing Chassis Cover

C
D
®
Intel Storage System SSR316MJ2 Backplane Board
B
C