Xn - Extended Result Codes - Westermo TDW-33 Commands Interface Manual

Xn – Extended Result Codes
Supported by:
TDW-33
Description:
This commands selects which subset of the result messages will be used by the modem
to inform the DTE of the results of commands.
Syntax:
ATX<n>
Parameters:
<n>
0: Enables result codes 0 through 4, the modem ignores dial tone and BUSY signals, if
allowed by the local PTT (blind dialling)
1: Enables all result codes except 6 and 7, the modem ignores dial tone and BUSY
signals, if allowed by the local PTT (blind dialling).
2: Enables all result codes except 7, the modem ignores busy signals, if allowed by the
local PTT.
3: Enables all result codes except 6, the modem ignores dial tone if allowed by the
local PTT.
4: Enables all result codes (default).
Command example
ATX<n>
S register: The value is written to S22 bits 4,5 and 6.
58 58
TD-36 TD-36 485
Possible responses
OK
ERROR
TR-36
Note
Otherwise
6618-3201