En - Enable/Disable Line Quality Monitor And Auto-Retrain Or Fallback/Fall Forward - Westermo TDW-33 Commands Interface Manual

%En – Enable/Disable Line Quality Monitor and Auto-Retrain or
Fallback/Fall Forward
Supported by: TDW-33
Description:
Enable/disable Line quality Monitor and Auto-Retrain or Fall back/fall forward.
This command controls if the modem automatically monitors the line quality and
requests a retrain (%E1) or fall back when line quality is insufficient or a fall forward
when line quality is sufficient (%E2). Set S41 bits 2 and 6.
Syntax:
AT%E<n>
Parameters:
<n>
0: Disable Line Quality and auto-retrain
1: Enable Line Quality and auto-retrain
2: Enable Line Quality Monitor and Fallback/Fall Forward / (Default)
Command example
AT%E<n>
S register: The value is written to S41 bits 2 and 6.
6618-3201
TD-36 TD-36 485
Possible responses
OK
ERROR
TR-36
Note
The command is valid
and accepted
Otherwise
11 11