Hn - Disconnect (Hang-Up) - Westermo TDW-33 Commands Interface Manual

+GCI – Country Parameters
Supported by:
TDW-33
Description:
This command selects the country code for modem.
Syntax:
AT+GCI = <value>
AT+GCI = ?
AT+GCI?
Parameters:
<Value>
Please refer to Country table
i.e.
A5: Selects country code for Sweden
B5: Selects country code for America
C7: Universal country code (Default)
Command example
AT+GCI = <value>
S register: None
Hn – Disconnect (Hang-Up)
Supported by: TDW-33
Description:
This command initiates a hang-up sequence.
Syntax:
ATH<n>
Parameters:
<n>
0: The modem will release the line if the modem currently is on-line.
1: If on-hook, the modem will go off-hook and enter command mode.
Command example
ATH<n>
S register: None
16 16
TD-36 TD-36 485
Possible responses
OK
ERROR
TD-36 TD-36 485
Possible responses
OK
ERROR
TR-36
Note
The command is valid
and accepted
Otherwise
TR-36
Note
The command is valid
and accepted
Otherwise
6618-3201