Kn - Break Control - Westermo TDW-33 Commands Interface Manual

\Kn – Break Control
Supported by:
TDW-33
Description:
Controls the response of to a break or the \B command received from the DTE or a
break received from the remote modem:
Syntax:
AT\K<n>
Parameters:
<n>
Mode 1
Modem is in on line data mode and a break is received from the DTE.
<n>
0: Enter on-line command modem, no break sent to the remote modem.
1: Clear data buffers and send break to remote modem.
2: Same as 0.
3: Send break to remote modem immediately.
4: Same as 0.
5: Send break to remote modem in sequence with transmitted data (Default).
Mode 2
Modem is in on line command mode and a \B is received in order send as a break to the
remote modem.
<n>
0: Clear data buffers, send break to the remote modem.
1: Same as 0.
2: Send break to remote modem immediately.
3: Same as 2.
4: Send break to remote modem in sequence with transmitted data.
5: Same as 4.
20 20
TD-36 TD-36 485 TR-36
6618-3201