Qn - Result Code Control - Westermo TDW-33 Commands Interface Manual

*Pn – Store Password and Callback numbers
Supported by:
TDW-33
Description:
Used for storing password and callback number 0 and 1 for the secure callback function.
For compability reasons only. See also AT*WCBTAB
Syntax:
*P<n>:Password:Callbacknumber
Parameters:
<n>
0: Information for password 0 and callback number 0
1: Information for password 1 and callback number 1
Command example
*P0:woodoo:911
S register: None
Qn – Result Code Control
Supported by:
TDW-33
Description:
The Q command controls the issuing of result codes sent to acknowledge AT commands
and call status events (e.g. OK, ERROR, RING).
Syntax:
ATQ<n>
Parameters:
<n>
0: DCE transmits result codes (default)
1: Result codes are suppressed and not transmitted
Command example
ATQ0
ATQ1
S register: The value is written to S14 bit 2.
6618-3201
TD-36 TD-36 485
Possible responses
OK
ERROR
TD-36 TD-36 485
Possible responses
OK
OK
TR-36
TR-36
Note
Otherwise
Note
DCE transmits result
codes
Result codes are
suppressed and not
transmitted
27 27