Result Codes - Westermo TD-32/485 Installation Manual

Result Codes

When a command is sent from the terminal the modem replies with a result code. The reply may be
either in Long Form i.e. text (V1) or in Short Form, i.e. a two digit code (V0). The result code in
Long Form is followed by <CR><LF> and in Short Form by <CR>. Using the Q1 command enables
the result codes. The result codes and their short forms are as follows:
00 OK
01 CONNECT
02 RING
03 NO CARRIER
04 ERROR
05 CONNECT 1 200
06 NO DIALTONE
07 BUSY
08 NO ANSWER
09 CONNECT 600
10 CONNECT 2 400
11 CONNECT 4 800
12 CONNECT 9 600
16 CONNECT 19 200
17 CONNECT 38 400
18 CONNECT 57 600
24 DELAYED
32 BLACKLISTED
33 FAX
34 +FCERROR
35 DATA
40 CARRIER 300
42 CARRIER 600
46 CARRIER 1 200
47 CARRIER 2 400
48 CARRIER 4 800
49 CARRIER 7 200
50 CARRIER 9 600
51 CARRIER 12 000
52 CARRIER 14 400
66 COMPRESSION: CLASS 5
67 COMPRESSION: V.42 bis
69 COMPRESSION: NONE
70 PROTOCOL: NONE
77 PROTOCOL: LAPM
80 PROTOCOL: ALT
81 PROTOCOL: ALT-CELLULAR
100 NOVRAM ERROR
101 NO NOVRAM
102 SWITCH ERROR
103 INACTIVITY TIMEOUT
6178-2203
The OK code is returned to acknowledge execution of a
command line.
The modem will send this result code upon connecting
with 300 baud.
Incoming ringing is detected on the line.
No carrier is detected.
The modem will send this result code when it's unable to
execute a command contained on the command line.
For connections with 1 200 baud.
No dial tone is received.
Busy (engaged) signal is detected on the line.
No answer from remote modem detected on the line until
the expiration of the time S7.
For connections with 600 baud on the DTE.
For connections with 2 400 baud on the DTE.
For connections with 4 800 baud on the DTE.
For connections with 9 600 baud on the DTE.
For connections with 19 200 baud on the DTE.
For connections with 38 400 baud on the DTE.
For connections with 57 600 baud on the DTE.
If dialled number not allowed to dial yet.
If dialled number is not allowed.
If it's a fax connection.
Error in fax connections.
Connected as data modem.
300 baud carrier.
600 baud carrier.
1 200 baud carrier.
2 400 baud carrier.
4 800 baud carrier.
7 200 baud carrier.
9 600 baud carrier.
12 000 baud carrier.
14 400 baud carrier.
MNP class 5 compression active.
V.42 bis compression active.
No compression active.
No error correction active.
LAPM error correction active.
MNP4 error correction active.
MNP10 with Cellular active.
Error in memory.
No memory mounted.
Error in switches.
Inactivity time limit reached.
35