Fclass - Select Active Service Class; Gn - Select Guard Tone - Westermo TDW-33 Commands Interface Manual

+FCLASS – Select Active Service Class
Supported by:
TDW-33
Description:
This command selects the active service class
Syntax
+FCLASS=<n>
+FCLASS?
+FCLASS=?
Parameters
<n>
0: Select Data Mode (Default.)
1: Select Facsimile Class 1
2: Select Facsimile Class 2
8: Select Voice Mode
&Gn – Select Guard Tone
Supported by: TDW-33
Description:
The modem Generates the guard tone elected by this command according to the param-
eter supplied (DPSK modulation modes only).
Syntax:
&G<n>
Parameters:
<n>
0: Disables Guard Tone (Default)
1: Disables Guard Tone
2: Selects 1800 Hz Guard Tone.
Command example
AT&G<n>
S register: The value is written to S23 bits 6 and 7.
14 14
TD-36 TD-36 485
TD-36 TD-36 485
Possible responses
OK
ERROR
TR-36
TR-36
Note
The command is valid
and accepted
Otherwise
6618-3201