Control Unit - Porsche Mobile Charger Operating Manual

Driver's Manual
Disconnecting the supply cable
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
Fig. 3: Disconnecting cables
CZ
b Charging of the high voltage battery has ended
HU
and the vehicle plug has been removed from the
vehicle charge port.
PL b The plug has been disconnected from the
HR
electrical socket.
1. Remove screw C using a suitable tool.
SR
2. Lift the lever A.
SK
3. Pull out the plug B until resistance is first felt.
4. Close the lever A.
SL
5. Pull out the plug B fully.
ET
LT
LV
RO
BG
MK
28
Securing supply cables and plugs
Fig. 4: Securing cables and plugs
b The lever A is closed.
1. Insert the plug B into the control unit until
resistance is first felt.
2. Lift the lever A.
3. Push in the plug B fully.
4. Close the lever A.
5. Secure the plug B to the control unit using
screw C.

Control Unit

Fig. 5: Control unit
ON/OFF button with indicator light and
A
additional charging current limiting function
Power supply/domestic connection indicator
light
Vehicle indicator light
B
Control unit indicator light
C Reset button with indicator light
The operating state of the control unit and charging
current limiting can be set using the ON/OFF
button .
The control unit can be reset using the reset
button if residual current is detected.