Overview; Connections On The Control Unit; Charger Control Unit; Display Panel Displays And Controls - Porsche Mobile Charger Connect Driver Manual

Overview

Overview

Connections on the control unit

Fig. 2: Connections on the control unit
A Supply cable
B Vehicle cable
The supply cable A can be removed and inserted at
the top of the control unit.
The vehicle cable B is removed and inserted at the
bottom of the control unit.
8

Charger control unit

Fig. 3: Control unit
A Power button
B Status LEDs
C Display
The charger can be switched on and off using the
Power button A (Fig. 3).
The status LEDs B (Fig. 3) show the status of the
charger.
Communication with the charger is shown on the
display C (Fig. 3) in the form of information and error
messages.

Display panel displays and controls

Fig. 4: Charger display
A Status bar
B Information area
C Menu bar
A brightness sensor controls the brightness of the
display. The brightness adapts automatically to the
ambient lighting conditions.
Status bar
Various symbols can be displayed in the status bar.
The following overview shows the meaning of the
symbols in the status bar.