Control Unit - Porsche 7PP.971.675.J Manual

Operating Instructions
Disconnecting supply cable
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
Fig. 3: Disconnecting cable
EL
b Charging of the high voltage battery has ended
CZ
and the vehicle plug has been removed from
the vehicle charge port.
b The plug has been disconnected from
HU
the electrical socket.
PL
1. Remove screw C using a suitable tool.
2. Lift the lever A.
HR
3. Pull out the plug B until resistance is first felt.
SK
4. Close the lever A.
5. Pull out the plug B fully.
SL
ET
LT
LV
RO
BG
28
Securing supply cable and plug
Fig. 4: Securing cable and plug
b The lever A is closed.
1. Insert the plug B into the control unit until
resistance is first felt.
2. Lift the lever A.
3. Push in the plug B fully.
4. Close the lever A.
5. Fasten plug B to the control unit using screw C.

Control Unit

Fig. 5: Control unit
ON/OFF button with indicator light and
A
additional charging current limiting function
Power supply/domestic connection indicator
light
B
Vehicle indicator light
Control unit indicator light
C
Reset button with indicator light
The operating state of the control unit and
charging current limiting can be set using
the ON/OFF button .
The control unit can be reset using the
reset button if residual current is detected.