Intended Use; Includes; Overview; Charger Control Unit - Porsche Mobile Charger Owner's Manual

Includes

charger commissioned by a qualified electrician
and set the charging current limit suited to the
home installation.
g Refer to chapter "Charging Current Limit" on
page 14.

Intended Use

Charger with integrated control and protection de-
vice for charging mode 2 to charge vehicles with a
high-voltage battery that comply with the generally
accepted standards and directives governing electric
vehicles.
e
Depending on the regional power grid, use the
appropriate device version.
g Refer to chapter "Technical data" on page 22.
The charger may only be used as a power cable,
operator control unit and vehicle cable combination.
6
Includes
Fig. 1: Charger overview
A Power cable (replaceable at operator control unit)
B Power cable plug on the operator control unit
C Power plug for connection to the power grid
D Vehicle charging plug (connector plug for the vehi-
cle)
E Vehicle cable (fixed to operator control unit)
F Control unit

Overview

Charger control unit

Fig. 2: Control unit
A On/Off button with light indicator and additional
charging current limitation function
B Power grid/house connection light indicator
Vehicle light indicator
Control unit light indicator
C Reset button with light indicator
The operating state of the control unit and the charge
limit can be set via the On/Off button
The control unit can be reset when a fault current is
detected via the reset button .
The light indicators A – C (Fig. 2) display the operat-
ing state of the control unit, a set charge limit and
possible faults by means of different colors, lights,
and flashing.
.